Altium designer 17 3d free. Altium Designer PCB Library – Footprints – Symbols – 3D Models
The Properties panel supports editing multiple objects, where the property settings that are identical in all currently selected objects may be modified.
A PCB List panel allows you to display design objects from one or more documents in tabular format, enabling quick inspection and modification of object attributes. Used in conjunction with appropriate filtering, it enables the display of just those objects falling under the scope of the active filter — allowing you to target and edit multiple design objects with greater accuracy and efficiency.
There are a number of tools and techniques for working with 3D Body objects and working in the 3D Layout mode. Some of these are summarized below. Add Component Clearance design rules to check for collisions between components that include 3D body objects in the X, Y and Z planes. This allows you to the check the clearance of component over another component. Multiple rules can be defined to handle different clearance requirements. Note that the Design Rule Check does not test if a 3D body object is passing through the board.
Refer to the Component Clearance design rule to learn more. If the 3D Body object is to represent a component, the 3D Body object should be added to the component footprint in the PCB library editor. Any mechanical layer can be used to place 3D Body objects. Typically a layer is chosen and named and that layer is used for 3D Body objects only. Because PCB components can be mounted on either surface of the finished PCB, the software supports the pairing of mechanical layers.
Working in exactly the same way as the paired top and bottom silkscreen layers, when a component is flipped from the top side to the bottom side, any object on a mechanical layer that is paired is automatically flipped on to the paired mechanical layer.
Layer pairing is not required for rendering of the model in 3D; the software uses the Board Side property to determine which surface the object is on and in which direction to render the 3D Body. Layer pairs are important if you need to generate side-of-board assembly printouts that include components on one side of the board. When mechanical layers have been paired in the View Configuration panel, they become Component Layers and appear in the Component Layers region of the Layers list.
Refer to the View Configuration panel page for more information on pairing layers. Reference and Snap Points provide a way of holding a 3D Body object during placement. Standard 3D Body objects have a reference point, as shown in the images.
Note that the reference point lines are not long so they may not appear outside the object. Generic models will have a reference point assigned in the MCAD software in which they were designed. Snap points are user-defined locations, which allow the object to be held at that location as it is moved in the workspace. Snap points are typically assigned to an edge or corner of the object or a center location, for example, the center of a pin or mounting peg.
It is easier to interactively add Snap points in 3D mode. Video demonstrating the process of importing a generic model and defining three snap points on it. It is common that a generic model designed in an MCAD tool will need to be re-oriented to use in board design.
This can be achieved by:. The software includes commands for orienting and positioning a component. It requires the designer to select three snap points that lie on the surface of the PCB then indicate the three reference points on the PCB to which each of these snap points should be mated.
The process is described and also demonstrated in the video below. Video demonstrating the process of re-orienting a Generic Model. Service Pack 1 Build 7. The following updates can only be applied to an existing Altium Designer 6 installation.
Updates are non-cumulative meaning that before any update can be installed, the version immediately prior to it has to already be installed for example, 6. Each downloads includes a setup program that is used to install the update. The below library downloads are deemed to be ‘frozen libraries’.
The content of these ZIPs was built at the time of the launch of Altium Designer 10, and will not be updated. The below downloads are deemed to be ‘frozen’.
These ZIPs were built at the time of the launch of Altium Designer 10 and may not include the same set of examples and reference designs as what is now available in the Content Store. All Altium Designer releases from Summer 08 onwards include all available output generators. For prior versions, the generators available for download are listed in the following collapsible sections:. As well as the standard output generators such as netlisters and BOMs included with Altium Designer 6, additional outputers can be added at any time.
This is a listing of additional outputers available for Altium Designer 6. When you restart your Altium software they will automatically appear in the appropriate menu. Download These output generators have been updated for Altium Designer 6.
You can check your version via the Help » About menu. EEsof Libra and Touchstone. Mentor Boardstation 6. Protel 2. Racal Redac. As well as the standard output generators such as netlisters and BOMs included with Altium Designer , additional outputers can be added at any time.
This is a listing of additional outputers available for Altium Designer Select the version of these files that corresponds to your version of Altium Designer. As well as the standard output generators such as netlisters and BOMs included with Altium DXP, additional outputters can be added at any time. When you restart Altium DXP they will automatically appear in the appropriate menu. Other Installers. Using Altium Documentation. Personal Vault 1. At the same time, the number of possible concurrent connections was reduced from 3 to a single connection.
Backing Altium Designer is a comprehensive set of online documentation. Wherever you are in the environment, over a menu command, a dialog, a panel, or a design object, press F1 to display comprehensive information about whatever was under the cursor. Within this comprehensive information, there are links to related information about how to place it, edit it, or use it.
You also will find links to richer content about how it fits into the overall design process. Available shortcuts also are listed in the various panels; look for the shortcut key strokes displayed next to the controls in the panel. Altium Designer Documentation. Using Altium Documentation. The Altium Designer documentation is versioned.
You can switch to a particular version’s documentation set manually, directly through your web browser, or you can sit back and access the correct version automatically from within Altium Designer. F1 mapping functionality and other documentation links are instilled that allow you to arrive at the correct documentation destination for the version of the software in which you are actively designing. Coming from a different design tool? Not a problem.
Scoot on over to the area of the documentation that looks at Interfacing to Other Design Tools. Read about Installing and Extending Altium Designer. Read about Getting Altium Designer Licensed. Read about Altium Design Environment. Read more Designing with a Connected Workspace. Key Benefits of an Altium Workspace. Some of the key benefits that Altium brings to the design table: Securely share PCB designs with internal and external stakeholders with a web link with which they can view and comment on the design via a web browser on any platform Mac, Windows, Android, or iOS and any device desktop or mobile.
Communicate true design intent early and collaboratively through commenting, co-creation, and visualization of PCB designs.
Work from anywhere and connect with anyone with ease. Built-in storage and version control tightly integrated with Altium Designer ensures that the latest data is available at any time from any device. Conduct more effective design reviews by allowing users to highlight and mark up a specific component or area on a schematic or layout. Collaborate with multiple designers. The web browser platform simplifies how designs are visualized and marked up while allowing other designers to connect to the same PCB design with Altium Designer to author changes.
Co-design with mechanical designers. Electrical and mechanical engineers can push and pull design data backward and forward in real-time with each being notified when changes have been made by the other. Altium provides native integration between electronic and mechanical domains through a built-in co-designer capability that provides native integration with a variety of MCAD software tools. Reduce miscommunication and redesign iterations with manufacturing.
Compress design cycles with the capability to create formal atomic design releases ensuring a coherent set of manufacturing data. Create a manufacturing package that can be bundled up according to the needs of your specific manufacturing partner.
It includes the capability for design, component data management, design data management, workflow authoring, process management, and more.
Altium designer 17 3d free
Download exe, 9 Mb. Download exe, 3. Download exe, 7. Latest version: 5. Download exe, 2. Download exe, 1. Download exe, 1 GB. Latest version: 3.
Download exe, 2 MB. PTC Creo Plugin. Download exe, 9. Download exe, 8. Download exe, 17 MB. AutoDesk Inventor Plugin. Download exe, 4. Autodesk Fusion Plugin. Siemens NX Plugin. View, print, and cross-probe single documents or entire projects in one comprehensive interface. Download Viewer. Latest version: 1. Download exe, MB. Note: If you previously had Library Loader installed then these account details will be filled in for you. You can also click the Symbol, Footprint and 3D Model images to view them in more detail.
The part will then be placed in the bottom left corner of your schematic ready for dragging into place. If you wish to share your experience with using Altium Library Loader, please click the Share button. Copyright SamacSys Ltd. Toggle navigation. The editing and control options vary for each type, providing controls necessary for sizing and positioning in the 3D workspace. Available options are:. If you are defining the 3D Body object, and want to reference a 3D model that is stored in an Altium Vault, this can be done from within the 3D Body dialog, when defining the properties for the body.
Snap points are reference points that can be useful when moving or aligning 3D Bodies to other PCB objects. Each Snap Point is represented by 3 thin, white lines that mark the Snap Point location. When you click and hold on a 3D body, the cursor will automatically snap to the nearest Snap Point or vertex. Note that 0, 0, 0 is located on the base of the object, at the geometric center of the 3D body when looking down at it in 2D display mode. An axis is essentially a dashed line drawn between the points defined by the Origin and Direction X, Y, Z locations.
Note that Origin 0, 0, 0 is located on the base of the object, at the geometric center of the 3D body when looking down at it in 2D display mode.
Altium Designer PCB Library – FREE – Footprints – Symbols – 3D Models – Navigation menu
If the Protect Locked Objects option is enabled on the PCB Editor — General page of the Preferences dialog, and the Locked option for that design object is enabled as well, then that /941.txt cannot be selected or graphically edited. They can be placed into a PCB library component footprint.